|  Home     | Contact    | Help & Support  | Links

InstalTest COMBO


Welcome

The InstalTest range are Australia's first multifunction single and three phase installation testers with measurement functions and Pass/Fail limits set to AS/NZS3000 Wiring Rules & AS/NZS3017.

The InstalTest COMBO is a manual multi-function and installation tester, and introduces the new single button "Socket Test" without the need for trailing leads. 

NEW ... InstalTest COMBO Data Logging & Reporting Version now Released!
NEW ... MI-TPI Three Phase Installation Testing Accessory Released! 

The InstalTest 3017 is a logging tester with Pass/Fail limits preset to AS/NZS3017 and stores test results for printing installation verification and compliance test reports.

The InstalTest COMBO combines the functions of 5 instruments with 12 tests in the one instrument:

  • Voltage, Frequency & Phase Sequence

  • Earth Resistance & Equipotential Bonding

  • Insulation Resistance

  • RCD Trip Time and Trip Current

  • Fault Loop/Line Impedance/PSC

  • RCD Testing

  • Socket Test - Earth Resistance, Correct Connections and Polarity as a single push button test without the need for trailing leads.

  • 3 phase installation verification using MI-TPI accessory. Safely and easily verify 3 phase installations from the socket outlet.

InstalTest 3017

Compliance Reporting

About InstalTest 3017

Ordering & Training

Brochures

Copyright 2010.
Emona Instruments Pty Ltd.
All Rights Reserved.

Watch the "Test Sockets in Seconds" Training Video!

This short training module shows electricians how to test sockets in seconds without cumbersome trailing leads using the Instaltest Combo.

The InstalTest Combo simplifies socket compliance testing from 4 tests to a single push button test.



The InstalTest 3017 covers AS/NZS3017 Electrical Installations tests with in-built Australian Pass/Fail limits and tables for:

  • Earth Continuity & Resistance

  • Insulation Resistance

  • Polarity

  • Correct Circuit Connections

  • Fault Loop Impedance

  • RCD Testing

  • 3 phase installation verification using MI-TPI accessory. Safely and easily verify 3 phase installations from the socket outlet.

Simply conduct the test, press the MEMory button to save the result and assign the result to a location, e.g. DB1/CB1 or 1st Floor/Room 5. Then download results to PC software and print-out compliance test reports with actual test results.

No more handwriting of test results and compiling compliance reports. No more multiple instruments to carry around.

The InstalTest 3017 guarantees faster testing, accountable test methods and fully traceable compliance reporting.

The InstalTest's unique "-Sequence Test" mode further speeds up compliance testing and reporting. For example, the "Socket Outlet Rapid" auto-sequence tests sockets in seconds, reducing the time taken to test hundreds of newly installed socket outlets to hours rather than the customary several days using traditional testing and reporting methods.

The InstalTest simplifies testing with in-built Australian measurements and Pass/Fail limits, and guarantees accountability and traceability with storing of test results ... An essential tool for every electrician, the InstalTest 3017 is Australia's own installation tester. 

NEW - MI-TPI 3 Phase Installation Testing Accessory

Verify 3 phase installations from the socket outlet, without the need for probing. Use with InstalTest COMBO or IT3017.

The MI-TPI makes 3 phase installation verification safer, faster and more reliable that traditional methods requiring probing of the 3 phase socket outlet.

For a detailed brochure click: MI-TPI 3 Phase Accessory Brochure

Tel: 1 800 632 953   Fax: 02 9550 1378   email: testinst@emona.com.au